Hygger Advanced Remote Control Aquarium Light for Freshwater Planted Tank

This LED aquarium light offers a variety of customizable lighting modes and features to enhance your aquatic environment. Let's explore the details:

Timer Mode of Daylight & Moonlight: To activate the default Day & Moon Light program, simply press the CLOCK button to set the current local time after unboxing. If the DIY mode is running, turn it off to enter the Day & Moon Light mode.

To create a custom Day & Moon Light mode: 1. Press and hold the TIMER button for 3 seconds until "DAY-L ON" blinks, then use the UP/DOWN buttons to set the turn-on time. Press TIMER to save. 2. Press the WRGB button to set the light color and brightness, then press TIMER to save. 3. Use the UP/DOWN buttons to set the turn-off time, then press TIMER to save. 4. Repeat the above steps to configure the "MOON-L" mode.

Note that the Day & Moon Light mode has two light time phases. To turn off the moon mode, set its brightness to "0". The light will gradually ramp up and down over 15 minutes during transitions.

Completely Manual Control: This light offers full manual control, allowing you to adjust the single color brightness level and create your own custom color mixes using the red, green, blue, and white LEDs.

DIY Mode: To activate the default DIY program, press and hold the DIY button until the screen displays "OFF," then use the UP/DOWN buttons to select "ON" and press DIY to save.

The DIY mode simulates a 24-hour natural lighting cycle, with a gradual orange sunrise, bright noon, afternoon, sunset, and moonlight transition from bright blue to dark blue, before automatically turning off.

To customize the DIY mode: 1. Press and hold the DIY button to activate the DIY mode. 2. Press DIY again to enter the settings, where the screen will display "L1." Use the UP/DOWN buttons to set the start and end times for the L1 stage, then press DIY to save. 3. Press the WRGB button to set the color and brightness for the L1 stage, then press DIY to save. 4. Repeat the above steps to configure the remaining L2 through L7 stages. L8 is off by default and cannot be set.

Wireless Remote Control: The remote control has a range of up to 32 feet, allowing you to adjust the brightness, color temperature, and switch the light on/off without leaving your couch or bed. (Note: The remote is not waterproof.)

Other Features: - Restore Factory Default: Unplug the power, remove the battery, and reinstall to reset the light. - Power-off Memory: The light will revert to the previous mode settings within an hour after power is restored. - Waterproof: The LED beads have a waterproof coating, and the PC plastic cover protects against water splashes. - Extendable Metal Bracket: Slide the brackets to adjust the light position for your aquarium. - Premium Aluminum Shell: Ensures effective heat dissipation for stable operation. - ETL-listed Safe Power Adapter: Input 100-240V, Output 20V, 6.56 ft cord.

With its versatile lighting modes, customization options, and durable construction, this LED aquarium light is a great choice to enhance your underwater paradise.

product information: